OneUp Dropper V2 Oversize Pin Kit

OneUp Dropper V2 Oversize Pin Kit

210000069884

Regular price$18.99 CAD
/

Steed Cycles - In stock
969 Marine Drive North Vancouver, BC V7P 1S4
+16049872168
 More payment options
Pickup available at Steed Cycles

Usually ready in 24 hours

OneUp Dropper V2 Oversize Pin Kit
Steed Cycles

Pickup available, usually ready in 24 hours

969 Marine Drive
North Vancouver BC V7P 1S4
Canada

+16049872168

Set of six oversized pins.

All dropper posts require key way clearance. With so many different framesclamps and ride heights it's not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.

Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.

Follow the instructions below:

  • With the post still installed on bike complete the following steps
  • Remove the saddle and clamps
  • Wipe away any dirt or debris
  • Lower the post to mid travel
  • Unthread mid cap assembly (8)
  • Remove Cartridge lockring (6) with needle nose pliers
  • Upper tube (7) will now slide out
  • Replace guide pins (10) with oversized guide pins (19) or (20) and regrease
  • Reassemble in reverse order

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed