Ibis Ripmo X01
- In stock, ready to ship
- Inventory on the way
What if we took everybody’s favourite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
GEOMETRY
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy.
COIL COMPATIBLE
The Ripmo V2 is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel through out the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo’ dropper, mo’ better. On small frames, you can run 125 – 150mm, pending your preference and inseam length. On medium, large and extra large, a 160mm — or, why not run a 185mm? Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
BUSHINGS
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiff ness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A polycarbonate downtube protector deflects debris, while molded rubber swing arm protectors keep things quiet and clean. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Fork
Fox Float 38 Factory Series 160mm, 29”, 110x15.
Shock
Fox Float Factory Series, X2 with EVOL, 210 x 55
Wheels
Ibis S35 Aluminum / 29" / Ibis Hubs
Tires
Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi
Brakes
SRAM Code RSC, 4 piston
Brake Rotors
SRAM Centerline 6 bolt 203mm/180mm
Cranks
SRAM X01 Eagle DUB spindle, 30t Alloy Ring, 170mm
Bottom Bracket
SRAM DUB BSA
Rear Derailleur
SRAM X01 Eagle
Shift Levers
SRAM X01 Eagle
Cassette
SRAM XG 1295 Eagle 10-52
Chain
SRAM X01 Eagle
Headset
Cane Creek 40 ZS44/ZS56
Grips
Lizard Skin Charger
Handlebar
Ibis 800mm Hi Fi Bar
Stem
Industry Nine A318 S/M: 40mm, L/XL: 50mm
Seatpost
Bike Yoke Revive Dropper S: 125mm, M: 160mm, L/XL: 185mm.
*Note: There is a 250lb rider weight limit on this post.
Saddle
WTB Silverado 142
* Specifications are subject to change without notice
EMAIL: sales@steedcycles.com
PHONE: 604-987-2168
